Sub Sections:
1
2
3
4
5
6
7
8
9
10
11
12
Pages:
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
Micro Piles |
Pressure Grouting |
Rock Anchors |
Permeation Grouting
Soil Nailing |
Compaction Grouting |
Micropiles |
Injection Grouting |
Chemical Grouting
Our
techniques apply when adding new structures:
especially
rock anchor,
microfine cement,
soil nailing,
micropile
installations for
foundation support.
We
specialize in
slope stabilization,
anchors,
permeation grouting,
foundation repair
and support,
grouting,
soil nails,
rock drilling,
micropile installations, and
sinkholes. We
use a
problem-solving approach geotechnical
architecture of buildings, bridges,
water plants, sewage plants, tunnels,
sinkholes,
caisson,
shoring,
underpinning,
agriculture, and
roads
construction. We
are experienced in these applications:
micro piles,
sinkhole repair,
permeation grouting, pressure
grout,
soil nails,
chemical grouting,
micropiles,
compaction grout, and
rock anchors.
Our specialties are
rock anchor,
acrylamide and
compaction grouting,
mini piles,
sinkhole repair,
micropiles,
acrylamide grouting, and
soil nailing.
We will continue to dedicate ourselves to
excellence,
including
insurance mortgage, in our performance, in our
integrity, and in our relationships with our
customers. We will carefully weigh our
decisions, actions, and results to make sure
that we remain the most trusted name in the
geotechnical contracting industry. Please
visit our website
http://www.rembco.com/.
Add Concrete Construction URL
Artistic Business Community Related Construction Industry Computers Education Relevant Entertainment Health Internet Family Recreation Science Shopping Society
|

Slurry Displacement Piles
JULY
1997
CALTRANS FOUNDATION MANUAL
9-15
The question that may arise from this limitation is why the contract specifications allow the
use of water as a drilling slurry at all. Retaining the limited use of water as a drilling slurry
allows a Contractor, who attempts to dewater a drilled hole using temporary casing and is
unable to do so for whatever reason, to have the option of using the water in the drilled hole
as a drilling slurry to prevent quick conditions at the bottom of the drilled hole and to be
able to place concrete.
The physical properties of water used as a drilling slurry are not as critical as with other
types of drilling slurries. Water is capable of suspending sand and silt only for short periods,
usually less than 30 minutes. This allows soil cuttings to settle to the bottom of the drilled
hole fairly rapidly. Since the pH of water is not important and water will not typically
become more viscous, the contract specifications set parameters for density and sand
content only. Testing these parameters verifies that most of the suspended material has
settled before final cleaning of the drilled hole and concrete placement.
Water used as a drilling slurry can be easily disposed of on site after settlement of all
suspended materials has occurred unless the water has been contaminated by hazardous
materials.
Mineral
Mineral slurries are processed from several different types of clay formations. Although
there are a number of different types of clay formations available, the most commonly used
consist of Bentonite and Attapulgite clay formations.
Bentonite is a rock composed of clay minerals, named after Fort Benton, Wyoming, where
this particular type of rock was first found. It is processed from the clay mineral Sodium
Montmorillonite, which hydrates in water and provides suspension of sands and other
solids.
Bentonite slurry is a mixture of powdered bentonite and water. Bentonite slurry will floccu-
late (destabilize) in the presence of acids and ionized salts and is not recommended for
ground formations where salt water is present without the use of chemical additives.