Standpipe continued
Water Level Indicator
Water levels in either the standpipe piezometer or the observation
well are generally measured with a water level indicator, sometimes
called a dipmeter. The water level indicator consists of a probe, a
cable or tape marked in millimeters or hundredths of a foot, and a
cable reel with built-in electronics. The probe is lowered down the
standpipe until a light and buzzer indicate contact with water. Depth
markings on the cable show the water level.
Slope Indicator’s Water Level Indicator offers a sensitivity
adjustment to accommodate variations in water conductivity and
well conditions.
Piezometers
Light
Buzzer
Batteries
Sensitivity
Control
Water Level
Probe Body
Insulator
Probe Tip
WLI.cdr
Rembco Geotechnical Contractors specializes in
slope stabilization,
soil nail wall,
foundation repair
and support,
grouting,
shoring,
micropile
construction,
rock drilling, and we remediate
sinkholes. We use a
problem-solving approach in the geotechnical portions of buildings, bridges, water plants, sewage plants, tunnels,
installing caisson bottom, and roads. We are experienced in these applications:
micro piles,
sinkhole repair,
permeation and
pressure
grouting,
soil nails,
cement grouting,
chemical grouting,
micropiles,
compaction grouting, and
rock anchors.
Rembco techniques apply when adding new structures: especially
rock anchor,
microfine cement,
soil nailing, and
micropile
installations for foundation support. Our specialties are
soil nails,
rock anchor,
chemical and
compaction grouting,
mini piles,
sinkhole repair,
micropiles, and
soil nailing.
