Tilt Plates
Ceramic tilt plates are bonded to the structure; bronze tilt plates can
be bonded or screwed. Follow the manufacturer’s instructions for
grout or epoxy. Level the tilt plate with a spirit level or a tiltmeter
sensor.
Beam Sensors and Tiltmeters
Place a vertically mounted tilt plate so that pegs 1 and 3 are
as nearly vertical as possible.
Place a horizontally mounted tilt plate so that pegs are square with the wall.
Pegs 1 and 3 should be parallel to the expected direction of rotation.
Rembco Geotechnical Contractors specializes in
slope stabilization,
soil nail wall,
foundation repair
and support,
grouting,
shoring,
micropile
construction,
rock drilling, and we remediate
sinkholes. We use a
problem-solving approach in the geotechnical portions of buildings, bridges, water plants, sewage plants, tunnels,
installing caisson bottom, and roads. We are experienced in these applications:
micro piles,
sinkhole repair,
permeation and
pressure
grouting,
soil nails,
cement grouting,
chemical grouting,
micropiles,
compaction grouting, and
rock anchors.
Rembco techniques apply when adding new structures: especially
rock anchor,
microfine cement,
soil nailing, and
micropile
installations for foundation support. Our specialties are
soil nails,
rock anchor,
chemical and
compaction grouting,
mini piles,
sinkhole repair,
micropiles, and
soil nailing.
