Micro Piles  |  Pressure Grouting  |  Rock Anchors  |  Permeation Grouting   |  Micropile
Soil Nailing  |  Compaction Grouting  |  Micropiles  |  Chemical Grouting   |  Soil Nail Wall


General Construction Specifications

   SECTION 01620

   STORAGE AND PROTECTION

   PART 1 GENERAL

    1.01 GENERAL

    A. Store products immediately on delivery in accordance with the manufacturer’s printed instructions, with seals and labels intact and legible, and protect until installed in the work.

    B. Arrange storage in a manner to provide easy access for inspection.

    1.02 ENCLOSED STORAGE

    A. Store products subject to damage by the elements in substantial weathertight enclosures.

    B. Maintain temperature and humidity within the ranges required by manufacturer’s instructions.

    C. Store unpacked products on shelves, in bins or in neat piles, accessible for inspection.

    1.03 EXTERIOR STORAGE

    A. Provide substantial platforms, blocking or skids to support fabricated products above the ground to prevent soiling or staining.

    B. Cover products which are subject to discoloration or deterioration from exposure to the elements with impervious sheet coverings. Provide adequate ventilation to avoid condensation.

    C. Store loose granular materials in a well-drained area on solid surfaces to prevent mixing with foreign matter.

    D. Provide surface drainage to prevent flow or ponding of rainwater.

    E. Prevent mixing of refuse or chemically injurious materials or liquids.

    1.04 MAINTENANCE OF STORAGE

    A. Maintain a periodic system of inspections of stored products on a scheduled basis to assure that:

    1. Condition of storage facilities is adequate to provide required conditions.

    2. Required environmental conditions are maintained on a continuing basis.

    3. Surfaces of products exposed to elements are not adversely affected.

    4. Note: Any weathering of products, coatings and furnishing is NOT acceptable under requirements of the Contract Documents.

    B. Have complete manufacturer’s instructions for servicing accompanying each item, with notice of enclosed instructions shown on the exterior of the package, for mechanical and electrical equipment which requires servicing during long term storage.

   END OF SECTION


 
This Section: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
Sections
: 1 2 3 4 6 7 8 9 10 11 13 14 15 16

Rembco Geotechnical Contractors specializes in slope stabilization, foundation repair and support, shoring, grouting, soil nails, micropile installations, and sinkholes. We are experienced in these applications: micro piles, sinkhole repair, permeation grouting, pressure grouting, soil nails, chemical grouting, micropiles, compaction grout, rock anchors and compaction piles. Our specialties are rock anchor, chemical and compaction grouting, mini piles, sinkhole repair, micropiles, and soil nailing. We use a problem-solving approach in the geotechnical portions of buildings, bridges, water plants, sewage plants, tunnels, sinkholes, caisson, and roads. Rembco techniques apply when adding new real estate structures: especially rock anchor, microfine grouting, soil nailing, micropile installations for foundation support. Add URL Construction, Drilling and Concrete