|
|
Micro Piles |
Pressure Grouting |
Rock Anchors |
Permeation Grouting |
Micropile
Soil Nailing |
Compaction Grouting |
Micropiles |
Chemical Grouting |
Soil Nail Wall
PART 1 - GENERAL
01 WORK INCLUDED
A. Nameplates and labels.
B. Wire and cable markers.
02 REFERENCES
A. ANSI/NFPA 70 - National Electrical Code (NEC).
PART 2 - PRODUCTS
03 MATERIALS
A. Nameplates: Engraved three-layer laminated plastic, white letters on a black background.
B. Wire and Cable Markers: Split sleeve or tubing type.
C. Paint: As specified in other Sections of these Specifications.
PART 3 - EXECUTION
04 INSTALLATION
A. Degrease and clean surfaces to receive nameplates.
B. Install nameplates parallel to equipment lines.
C. Secure nameplates to equipment fronts using screws or rivets. Secure nameplate to inside face of recessed panelboard doors in finished locations.
05 WIRE IDENTIFICATION
A. Provide wire markers on each conductor in panelboard gutters, pull boxes, and at load connection. Identify with branch circuit or feeder number for power and lighting circuits, and with control wire number as indicated on equipment manufacturer's shop drawings for control wiring.
06 NAMEPLATE ENGRAVING
A. Provide nameplates of minimum letter height as indicated below.
B. Panelboards, Switchboards and Motor Control Centers: 1/4 inch; identify equipment designation. 1/8 inch; identify voltage rating and source.
C. Individual Circuit Breakers, Switches, and Motor Starters In Distribution Panelboards, Switchboards, and Motor Control Centers: 1/8 inch; identify circuit and load served, including location.
D. Individual Circuit Breakers, Enclosed Switches, and Motor Starters: 1/8 inch; identify load served.
E. Transformers: 1/4 inch; identify equipment designation. 1/8 inch; identify primary and secondary voltages, primary source, and secondary load and location.
07 EMERGENCY POWER SYSTEM COLOR CODING
A. Color coding shall be in accordance with NEC Article 700-9(a).
END OF SECTION
|
This Section:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
Sections: 1 2 3 4 6 7 8 9 10 11 13 14 15 16 |
Rembco Geotechnical Contractors specializes in slope stabilization, foundation repair and support, shoring, grouting, soil nails, micropile installations, and sinkholes. We are experienced in these applications: micro piles, sinkhole repair, permeation grouting, pressure grouting, soil nails, chemical grouting, micropiles, compaction grout, rock anchors and compaction piles. Our specialties are rock anchor, chemical and compaction grouting, mini piles, sinkhole repair, micropiles, and soil nailing. We use a problem-solving approach in the geotechnical portions of buildings, bridges, water plants, sewage plants, tunnels, sinkholes, caisson, and roads. Rembco techniques apply when adding new real estate structures: especially rock anchor, microfine grouting, soil nailing, micropile installations for foundation support. Add URL Construction, Drilling and Concrete