Micro Piles  |  Pressure Grouting  |  Rock Anchors  |  Permeation Grouting   |  Micropile
Soil Nailing  |  Compaction Grouting  |  Micropiles  |  Chemical Grouting   |  Soil Nail Wall

   PART 1 - GENERAL

    01 SECTION INCLUDES

    A. Interior luminaires and accessories.

    B. Lamps.

    C. Ballasts.

    D. Exterior luminaires and accessories.

    02 REFERENCES

    A. ANSI C82.1 - Specification for Fluorescent Lamp Ballasts.

    B. ANSI C82.4 - Specifications for High-Intensity-Discharge Lamp Ballasts (Multiple Supply Type.)

    C. NEMA LE 2 - HID Lighting System Noise Criterion (LS-NC) Ratings.

    1.02 SUBMITTALS

    A. Submit product data under provisions of applicable Sections of Division 1.

    B. Include outline drawings, lamp and ballast data, support points, weights, and accessory information for each luminaire type.

    C. Provide fixture samples and detailed photometric data and calculations when requested by the Architect.

    1.03 DELIVERY, STORAGE, AND HANDLING

    A. Deliver products to site, store, and protect under provisions of applicable Sections of Division 1.

    B. Handle metal poles carefully to prevent breakage and damage to finish.

   PART 2 - PRODUCTS

    03 ACCEPTABLE MANUFACTURERS - LIGHTING FIXTURES AND ACCESSORIES

    A. Provide lighting fixtures and accessories by the manufacturers and catalog numbers indicated in the Lighting Fixture Schedule on the Drawings for each fixture type.

    B. Substitutions: Under applicable Sections of Division 1. Samples of proposed substitute fixtures, along with detailed photometrics and calculations shall be furnished when requested by the Architect.

    04 INTERIOR FIXTURES AND ACCESSORIES

    A. Exit Signs: Directional arrows as indicated, universal mounting type; as scheduled on drawings.

    B. HID Luminaires: Pre-wired, with integral ballast.

    05 EXTERIOR FIXTURES AND ACCESSORIES

    A. Enclosures: Complete with gaskets to form weatherproof assembly.

    B. Provide low temperature ballast, with reliable starting to 0 degrees F.

    06 ACCEPTABLE MANUFACTURERS - LAMPS

    A. General Electric.

    B. Phillips.

    C. Sylvania.

    2.02 LAMPS

    A. General Use Incandescent Lamps: Inside frosted type, rated 130 volts.

    B. Incandescent Reflector Lamps: Shape as scheduled, rated 130 volts.

    C. Fluorescent Lamps: All by same manufacturer. Warm White color. Standard four foot lamps shall be the energy saving type, 34 watt, equal to General Electric "Watt-Mizer".

    D. Metal Halide HID Lamps: Phosphor coated.

    2.03 ACCEPTABLE MANUFACTURERS - BALLASTS

    A. Advance.

    B. General Electric.

    C. Universal.

    2.04 FLUORESCENT BALLASTS

    A. Fluorescent Ballasts: ANSI C82.1; high power factor type.

    B. Nominal 430 ma Lamp Ballasts: Premium; Low energy type, equal to General Electric "Watt-Mizer".

    2.05 HID BALLASTS

    A. HID Ballast: ANSI C82.4; Selected by luminaire manufacturer.

    B. LS-NC Rating: NEMA LE 2; equal to or less than ratings listed in Table C-1.

   PART 3 - EXECUTION

    07 INSTALLATION

    A. Install lamps in luminaires and lampholders.

    B. Pendant mount channel type or industrial type fluorescent fixtures from building structure using 3/8" threaded rods. Provide support channels where required.

    C. HID Luminaires: Install as shown on Drawings.

    08 RELAMPING

    A. Relamp luminaires which have failed lamps at completion of Work.

    09 ADJUSTING AND CLEANING

    A. Align luminaires and clean lenses and diffusers at completion of Work. Clean paint splatters, dirt, and debris from installed luminaires.

    END OF SECTION